5W-30 fully synthetic 4-stroke motorbike oil Ester 4L.
RAVENOL Motobike 4-T Ester SAE 5W-30
RAVENOL Motobike 4-T Ester SAE 5W-30 is a 4-stroke high performance smooth running multi-range engine specially designed for 4-stroke engines. Thanks to its synthetic components and an innovative additive system matched to them, it is ideally suited for demanding engines of motorcycles with wet couplings and lubricated couplings.
The excellent cold start behaviour ensures optimum lubrication safety in the cold running phase. Due to significant fuel savings RAVENOL Motobike 4-T Ester SAE 5W-30 contributes to environmental protection by reducing emissions.
Application Note
RAVENOL Motobike 4-T Ester SAE 5W-30 is suitable as high performance smooth running engine for all engine types where the SAE 5W-30 specification is required.
Quality Classification
RAVENOL Motobike 4-T Ester SAE 5W-30 is proven in practice and tested in units with compliance regulations:
Specifications
API SM, JASO MA/MA2 T903:2006
Practical experience and tested in units with regulation:
Yamaha, Kawasaki, Honda, Aprilia, BMW, Suzuki, Ducati, Triumph, Moto-Guzzi
Properties
RAVENOL Motobike 4-T Ester SAE 5W-30 offers:
- very stable and excellent viscosity performance
- Excellent shear stability
- Very good cold start properties
- A reliable lubricating film at very high operating temperatures
- Significantly lower evaporation tendency, therefore lower Öl consumption
- Very good deterging and dispersing properties
- Very good wear and corrosion protection
- Protection against foam formation
- Excellent detergent and dispersant properties
- Catalyst suitability
Properties
unit | data | check after | |
---|---|---|---|
Color | yellow brown | visually | |
Density at 20°C | kg/m³ | 855 | EN ISO 12185 |
Viscosity at –30°C | mPa.s | 5980 | ASTM D5293 |
Viscosity at 40°C | mm²/s | 61.8 | DIN 51 562 |
Viscosity at 100°C | mm²/s | 10.8 | DIN 51 562 |
Viscosity index VI | 165 | DIN ISO 2909 | |
Flamepoint (COC) | °C | 228 | DIN ISO 2592 |
Pourpoint | °C | -33 | DIN ISO 3016 |
TBN | mg KOH/g | 8.8 | ASTM D2896 |
Noack Evaporation test | % | 11.4 | ASTM D5800/b |
sulfated ash | % | 1.2 | DIN 51 575 |
Low Temp. Pumping viscosity (MRV) at -35°C | mPa*s | 16.570 | ASTM D4684 |
All data given are approximate and are subject to change without notice.
H412 Schädlich für Wasserorganismen, mit langfristiger Wirkung
EUH210 - Sicherheitsdatenblatt auf Anfrage erhältlich
P273 Freisetzung in die Umwelt vermeiden.