RAM Mounts Universal motorcycle mount for small electronic devices - with base mounting fitting for Aprilia Tuono ABS 125 TYB03 2014-2014,

RAM Mounts Universal motorcycle mount for small electronic devices - with base mounting

RAM Mounts Universal motorcycle mount for small electronic devices - with basic mounting (handlebar/brake/clutch), B-ball (1 inch), in polybag with head card for hanging up

The RAM Finger Grip Universal Mount with Brake/Coupling Socket for attaching to brake/coupling accumulators as well as to rails with a diameter of 13 to 32 mm, a double socket arm, a diamond adapter socket and a high-strength Universal Finger Mount.
The brake/clutch accumulator fasteners include both standard and metric fasteners.
The base fits the control terminals on your motorcycle with 40x6 mm stainless steel screws included.
To see if the base can be attached to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.
The hole centres have a minimum width of 24 mm and a maximum of 40 mm.

Including purchase:
1 Universal finger grip holder
1 Base/ball adapter (attaches directly to the holder)
1 Standard size double-jointed arm
1 Mounting base (attaches either to the brake/coupling accumulator or to the rail/coupling adapter). mounted on the handlebar)
1 Hardware for mounting either on the brake/coupling accumulator or on the rail or handlebar.

Height dimensions:
Minimum with top and bottom plate: 133 mm
Maximum with top and bottom plate: 152 mm
For larger devices, the top and bottom plates can be removed.

Dimensions for short-arm clamps:
Maximum depth: 19 mm
Maximum width: 32 mm
Maximum width: 76 mm

Dimensions for semi-arm clamps:
maximum depth: 32 mm
minimum width: 38 mm
minimum width: 89 mm

dimensions for long arm clamps:
maximum depth: 41 mm
maximum depth: 57 mm
Maximum depth: 89 mm

Material: High strength marine grade composite & powder coated aluminum
Ball size:B Size 1 inch (25.4 mm) Rubber ball
Plate dimensions: 64 mm W x 127 mm H inch

Note:
The U in the part number reflects the product packaged in a polybag.
This product can be mounted on the brake/clutch reservoir as well as on any round rail with a diameter from 13 to 32 mm.
To see if the base can be attached to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir.
The hole centres have a minimum width of 24 mm and a maximum of 40 mm.

Technical data

EU Responsible Person : BTS GmbH, Plochingerstrasse 41, Otsfildern, 73760, info@biketeile-service.de