Fuel hose -BGM PRO Tpr-Pur (not curing)- Vespa Classic (Ø inside = 7mm, Ø outside = 14mm, l = 750mm) - black - fits Vespa PX, T5 fitting for Vespa V 50 V5SA1T 1974, 2,5 PS, 1,8 kw

Gasoline hose -BGM PRO Tpr-Pur Ø7x14mm- does not harden, for Vespa Klassik

The BGM PRO Tpr-Pur fuel hose is a professional fuel hose that does not harden.
The hose is manufactured for BGM PRO in Italy to extremely high quality standards (the manufacturer also produces for KTM series vehicles, among others).

• Media resistant to: Gasoline, oil, acids. Alkalis, alcohol

• UV resistant

• Durable

The hose has the typical Vespa dimensions of Ø7x14mm. It has a very high kink resistance and can therefore also be laid in small radii. The material is also very abrasion resistant and is also permanently resistant to an increased alcohol content in gasoline.

• Inner diameter: Ø7mm

• Outer diameter: Ø14mm

• Length: 750mm

The large outer diameter provides a perfect seal in the through rubbers in the frame.
TIP: In the PX models, the fuel hose should be laid as long as necessary and as short as possible to always have a sufficient supply of gasoline. To do this, first connect the hose to the tank, insert it into the frame, then guide the hose through the carburetor bowl, and pull a little until the excess hose length is out of the frame.
Only then cut to length. An ideal addition are our stable and transparent fuel filters with sight glass from OMG from Italy. Simply insert them into the fuel hose with the high-quality MiniFlex hose clamps.

_{AI-translation}