Adjuster screw and trunnion set -BGM ORIGINAL- Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint150 (VLB1T), TS125 fitting for Vespa V 50 V5SA1T 1978, 2,5 PS, 1,8 kw

A complete revision set for the actuation cables of almost all classic vesps, this should not be missing in any glove box!

For the first time we can offer the otherwise very expensive individual parts as a cost-effective complete set. All in a fantastic quality. Manufactured by a supplier for the Japanese motorcycle industry, the details of the set are impressive.
The clamping screws for the cables have an internal plate like in the original, which protects the cable from being crushed or even sheared off.
Also included are the very important end sleeves which are necessary as abutments for the Bowden cable outer sheath of the cables on the older models before the PX series.

The saving compared to the single parts is more than 10Euro!
The 27 pcs. Set contains in detail:

2x	bulb nipple adapter Ø=8mm
2x	Pear nipple adapter Ø=9mm
4x	setting screw M5x20
3x	setting screw M5x30
1x	setting screw M7x20
5x	end sleeve Ø=6,2
1x	end sleeve Ø=8,2
2x	clamping nipple Ø=4mm (Gas)
2x	clamping nipple Ø=5,5mm (gas)
5x	Clamp nipple Vespa (shift notch/clutch)

em>AI-translation>/em>/sub>