JMC DRY CHAIN LUBE 300ml JMC
Priceunit: 1 Unit
JMC Chain spray drying Fully synthetic, bright, highly adhesive special lubricant with additives against aging, corrosion and abrasion. The high PTFE solids guaranteed a fat-free sealing of the entire surface. Power: - For O- and X-Ring chains recommended - Excellent adhesion, no dripping and centrifuging - Economical - Waxy dry film, therefore no adhesion of dirt - Water-resistant, extreme protection against corrosion - Excellent damping properties - Excellent creep and penetration - Very resistant to aging, also against aggressive media - Low friction, low wear - Extreme UV Resistant Application: - For the lubrication of all chains, sliding surfaces, spline shafts, cardan and universal joints, spindles, guides and gears - Chiefly used in dusty environments Application: Shake well before use. Surfaces should be dry, dust and grease. The dry chain lube thinly. Sprinkle again thin after about 2 minutes. Allow to dry very well before loading. Content: 300 ml aerosol Package: 12
Manufacturer Nr.: JMC MR 10011
EAN: 4043981095586
EU Responsible Person : BTS GmbH, Plochingerstrasse 41, Otsfildern, 73760, info@biketeile-service.de
Signal word: Danger
Hazard statements
- H222 Extremely flammable aerosol.
- H229 Pressurized container: May burst if heated.
- H315 Causes skin irritation.
- H336 May cause drowsiness or dizziness.
- H412 Harmful to aquatic life with long lasting effects.
Precautionary statements
- P102 Keep out of reach of children.
- P101 If medical advice is needed, have product container or label at hand.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 Do not spray on an open flame or other ignition source.
- P251 Do not pierce or burn, even after handling.
- P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
- P271 Use only outdoors or in a well-ventilated area.
- P273 Avoid release to the environment.
- P280 Wear protective gloves.
- P302+P352 IF ON SKIN: Wash with plenty of water.
- P332+P313 If skin irritation occurs: Get medical advice/attention.
- P304+P312 IF INHALED: Call a POISON CENTER or doctor/physician if you feel unwell.
- P410+P412 Protect from sun exposure. Do not expose to temperatures exceeding 50 °C/122 °F.
- P501 Dispose of contents/container to an appropriate recycling or disposal facility.
EUH208 Contains Benzene, C9-13-alkyl derivs., Distillate
Universal spare part, See description" /> 
2-5 business days 
on request 