torque spring Malossi yellow K7.6 / L81mm for Minarelli 100 2-stroke M.2911388Y0
Malossi strengthened counterpressure springs for rear Malossi convertors. Counterpressure springs place the drive belt under tension, preventing slippage, for increased drive. Ideal for tuned engines with slipping belts. Straight swap for the original.
Unfortunately, Malossi does not give any indication of percentage change in relation to the OEM spring on Maxi scooters. However, Malossi indicates the spring stiffness (K) and the length of the spring. Thus, the springs can at least compare with each other. In principle applies to Maxiscooter:
1. green springs are softer than the OEM spring
2. all other springs are stiffer than the OEM spring
3. the higher the (K) value, the stiffer the spring
4. at the same (K) value, the longer spring is stiffer
Unfortunately, Malossi does not give any indication of percentage change in relation to the OEM spring on Maxi scooters. However, Malossi indicates the spring stiffness (K) and the length of the spring. Thus, the springs can at least compare with each other. In principle applies to Maxiscooter:
1. green springs are softer than the OEM spring
2. all other springs are stiffer than the OEM spring
3. the higher the (K) value, the stiffer the spring
4. at the same (K) value, the longer spring is stiffer
Manufacturer Nr.: Malossi
EAN: 4250362477361
EU Responsible Person : BTS GmbH, Plochingerstrasse 41, Otsfildern, 73760, info@biketeile-service.de
Attention! Does not fit for Malaguti CR1 Crosser 50 43 1998, 3,8 PS, 2,8 kw
